+7 383 203-28-12
+7 913-923-66-02
+7 913-923-66-02
|
NHP-520 vibrating machine for blocks production
NHP-520 production line for vibrocompression products is designed for output of wide assortment of high quality products for construction engineering sector. main part of the line is vibrating machine for blocks. It also produces borders, paving slabs and other items. Line operation is controlled by system based on PLC software which was developed and carefully tested at many plants. Thanks to automated control system all production line is managed by one operator. With automation of process flow, all molding cycles are stable and of high quality. Besides that, this equipment can operate at different speeds depending on production needs.
Vibrating machine for blocks production is equipped with panel with graphic panel where you can watch the whole production process. Besides automatic mode of operation you also can switch the line into the manual mode. It is important in the cases when there is a necessity to continue work during troubleshooting and preventive measures.
NHP-520 line includes intake hopper, weigh batcher, concrete mixer, hydro station NHP-520, conveyor transporter for materials feeding and automated control system. Taking into consideration that it is possible to use different matrixes and man molds, such vibrating machine for blocks production allow getting a wide assortment of products.
Products are molded on wooden or metal pallets. Later the pallets are stacked and transported with forklift to warehouse. At customer’s option line can have one or two concrete mixers, and also conveyor or air transporting system. Specifications:
* Molding pallet is limited by feet height
Capacity:
|