MEDIA

CATALOGUES

Catalogues »

Catalogue
Equipment for manufacturing of foamed concrete
.pdf 44 mb

 

GN-10 Gerotor pump



 

GN-10 Gerotor pump for forcing feed of foamed concrete and polystyrene concrete mixtures with fibro or solids of size up to 4 mm. it is designed for using on industrial sites. Recommended designated are:  feed of foamed concrete, polystyrene concrete, paint and plaster mortars, paste fillers, emulsions, slimes and other. Using pump it is possible to feed mixture up to 30*m vertically and to 120*m horizontally.
 
Structure:
  • Frame;
  • Drive transmission mechanism;
  • Gerotor pair Z065S01;
  • Vlectric motor;
  • V-belt transmission;
  • Starting device

The pump structure has inlet nozzle or receiving hopper for treated material.

Note: 
*distance of feed is defined if available two mitre elbows 90?? and mortar plasticity 13 cm acc. to GOST 5802-86. If mortar plasticity changes, pump capacity and feed distance change correspondingly.
 

 

PARAMETER
VALUE
 Capacity, m3/hr
 10
  Power of gear motor, kW
 7.5
 Pump pressure, kg/cm2
15
  Distance of mortar feed
  Horizontally, m
  Vertically, m
 
120**
30**
 Number of shaft rotations
300
 Operating voltage
380V 50Hz
   
 Overall dimensions, mm
 
   Length
   Width
   Height
 
  1500*

 850*

  500*
  Weight, kg, max
110
  Operating temperature
+5°??..+40°??
  Relative humidity
to 80%
  Environmental
UZ(GOST 15150)
  Long-time operation
(S1)
  Maintenance staff, pers.
1


все оборудование